1. Preparation
① Prepare the necessary tools and utensils, such as rags, dry towels, buckets, cleaning agents, brooms, mops, vacuum cleaners, and carpets that need to be replaced as required.
②Notify the elevator operator to stop the elevator and cut off the power supply.
2. Clean the inner wall of the car
①Dip the rag into a bucket of detergent, pick it up, wring it out, and wipe vigorously it along the inner wall of the car from top to bottom.
②If there is more stubborn dirt or stains on the wall, you can use a shovel to lightly scrape or spray the detergent directly and wipe it back and forth with a rag.
③ After soaking in clean water with another rag, wring it out and wipe it. Wring the rag thoroughly after cleaning it, and wipe it thoroughly again.
④ Wipe the elevator buttons and display screens with a semi-dry and wet towel.
⑤The ceiling of the car can be cleaned once a week. The cleaning method of the other parts is the same as that of the inner wall of the car except that the lighting mirror and the camera probe should be gently wiped with a semi-dry wet towel.
3. Clean the car door inner groove and car floor
① Use iron hooks to pick up debris in the car door inner groove, or use a vacuum cleaner to clean the sand in the car door inner groove.
②If the car floor is covered with carpets that are replaced every day, you only need to lift up the old carpet and mop the car floor with a semi-dry and wet mop. After the moisture evaporates, place a clean carpet.
③If the car floor is a fixed carpet, a vacuum cleaner can be used to clean the sand and debris on the ground, and the floor scrubber (carpet machine) should be cleaned with detergent once a week.
④ If the floor of the car is made of wood or synthetic plastic, you can use a wet mop with a cleaning agent to mop, then mop with water, and finally use a dry mop to wipe off the water.
4. Clean the elevator car door
①The material of the elevator car door is generally stainless steel. When cleaning, spray a little stainless steel spray first, and then wipe it with a soft cotton cloth from top to bottom to make the elevator car door clean and bright.
②After the cleaning operation is completed, you should look around the entire elevator car to check if there are any omissions and incomplete cleaning. If any, you should make up immediately, and finally notify the elevator operator to restart the elevator.
5. Tour cleaning method
When the elevator is in normal operation, use the clamp to pick up the garbage or debris on the elevator floor, and use it to wipe the buttons, display screen, and dirty marks with a towel.
