wangyanyan@hzaolida.com    +8617376562355
Cont

Have any Questions?

+8617376562355

Jan 12, 2020

Villa elevator installation conditions

The elevator shaft should not be closely arranged with the bedroom and living room; the thickness of the concrete wall on the working surface is 150mm, and the thickness of the ring beam is 150mm; the bottom pit of the shaft should be kept wet, disinfected, and never accumulate water.

· Advantages of villa elevator

✔ The steel, plate, leather and other materials used in the entire car of the villa elevator are flame retardant materials. The design of the 120-minute fire door improves the safety level;

✔ The UPS power supply is designed for sudden power failures. The UPS equipment will start manually, run the elevator to the nearest floor and open the elevator doors to avoid the situation of passengers being trapped due to sudden power failure;

✔ The unique emergency dialing device can preset 5 phone numbers, no limit on landline, mobile phone or emergency alarm number. In case of emergency, you only need to cleverly follow it to dial out like a stable phone. When you have not connected to the phone, you will manually dial the next number in the preset order until the call is connected to ensure that the trapped personnel get it immediately Rescue.

· Structure advantage of backpack rack

The home elevator adopts a backpack rack type, which is very small and different from the traditional way of elevator rail layout. Generally, the main guide rails of the elevator are arranged on both sides of the car, so the structure of the backpack rack breaks this common sense, and both the main guide rails and the auxiliary guide rails are used. As for the same side of the car, the force direction of the guide rail has been changed from above the structure.

The backpack-like lightweight structure makes more and more accurate use of the hoistway space. The backpack rack rails are placed on the same side, and there is no need to occupy the space of the hoistway in addition. It can make the elevator car and other components have enough space for layout, and the requirements for the size of the top floor and the pit are also increasing.

The counterweight position of the backpack rack villa elevator is very flexible. It can be placed sideways or rearward, which is flexible in the layout of the shaft. In addition, the position of the door opening can be adjusted accordingly according to the door opening method. The door opening method can realize single door opening, through door opening, 90 ° right angle opening and three side door opening.



Send Inquiry